About the Product
- For large area installations, extends the power output by 15 Amps
- Controlled by DITRA-HEAT-E-RS1 smart thermostat via low voltage 2 conductor 20 AWG signal wire
- Supports 120 V and 240 V cables
- Built in Class A GFCI
Schluter®-DITRA-HEAT-E-RRS is a power module that extends power output when used in conjunction with the DITRA-HEAT-E-RS1 thermostat.
The DITRA-HEAT-E-RRS power module can only be used in conjunction with the DITRA-HEAT-E-RS1 thermostats. The power module is used when the heating load exceeds 15 amps (e.g., in large floor applications) to maintain a single point of control.
No more than 10 DITRA-HEAT-E-RRS power modules should be connected in a series to a single DITRA-HEAT-E-RS1 thermostat; however, that number may decrease depending on the application. The goal is to eliminate any uneven temperatures in a large room which may present various heat loss characteristics (e.g., a below grade application with 1 thermostat and 3 power modules can cover over 1100 square feet. The initial temperature from one end of the application to the other may vary).